What to pay attention to before using the jaw crusher

Time：2023-04-21 15:16:38 Share To

　　The jaw crusher we use is lighter in weight, has fewer components, more compact structure, and a better filling degree in the crushing cavity, which is very helpful to our work, so it is widely used. Before using it, we What preparations do you do?

　　1. Carefully check whether the lubrication of the bearing is good, and whether there is enough grease at the joint of the thrust plate.

　　2. Carefully check whether fasteners are fastened.

　　3. Carefully check whether the transmission belt is in good condition. If any damage is found, it should be replaced in time. When there is oil on the transmission belt or pulley, wipe off the oil with a rag.

　　4. Check whether the protective device is in good condition. If any unsafe phenomenon is found, it should be eliminated in time.

　　5. Check whether there are ores or sundries in the crushing cavity. If there are ores or sundries, they be cleaned up to ensure that the crusher cavity starts.

　　6. Check whether the jacking bolts are returned, whether the gasket group is pressed tightly, and whether the T-bolts are tightened. Crusher drivers be trained to achieve "three understandings" (understand structure, understand , understand principles), "four comprehensions" (know how to use, know how to maintain, know how to maintain, and know how to deal with failures), and pass the training examination to obtain a certificate After that, they are owed to work.