How to do the daily cleaning of the impact crusher

Time：2023-01-12 16:32:57 Share To

　　1. Clean inlet and outlet of impact crusher

　　Check the feed and discharge ports for excess material left in previous operations. If the material is not clean, it may affect the quality of the product in the following work.

　　2. Clean bearing of impact crusher.

　　If the bearing has adhesion, the heat dissipation of the bearing will be affected. This will increase the bearing temperature and affect the service life and of the equipment. If it is caused by an accident or other problems, if accessories are found on bearings, they should be cleaned up in time to ensure that bearings can run stably. Also check and clean V-shaped belts. No dirt or dust can be left on the V-belt. V-belt stains and dust will increase V-belt wear and shorten the service life of the equipment. It should be cleaned and maintained as soon as possible.

　　3. Counter crusher chamber cleaning

　　The chamber should also be cleaned. Before starting the machine, carefully check the crusher chamber for waste materials. This can reduce the load on the crusher. The load operation still has a significant impact on the device. Wear mask gloves during the cleaning process to avoid inhaling dust.