The reason of slow discharge of hydraulic cone crusher

Time：2023-01-10 16:30:00 Share To

　　1. The common reason for the cone plugging material problem is that the material is fed too fast, * to the equipment can not be released in time, and then constitute the problem of accumulation and even plugging. This situation will cause the emergence of the problem of slow equipment discharging. When we run the equipment, we feed at a uniform speed, so that this situation can be avoided.

　　2. The water content of the treated material is too large. If the material is treated with high moisture, after entering the crushing chamber of the hydraulic cone crusher, follow the work of the equipment, under the strong crushing, it will inevitably appear adhesion phenomenon, and even blockage, ly reducing the crushing capacity of the equipment for the material, but also lead to slow discharge of the hydraulic cone crusher.

　　3, the feeding amount is too large. In our material processing with hydraulic cone crusher, if too much material is put into the crushing chamber and occupies part of the space in the crushing chamber, the crushing space of the material will be reduced, and then the discharge will be slow after crushing.

　　4, the size of the discharge port is not appropriate. When the size of the hydraulic cone mine opening is not appropriate, it will cause the broken and qualified materials to be discharged in time, and then constitute material accumulation and blockage, affecting the crushing of stone, and then lead to slow discharge of hydraulic cone crusher.