How to maintain and repair the vibrating feeder

Time：2022-11-11 16:36:04 Share To

　　In the production process, the vibrating feeder is used to uniformly, continuously or quantitatively feed the block, granular and powdery materials from the storage bin or hopper to the receiving device. Due to the complex nature of the material, the wear and tear of the vibrating feeder The impact is different. This article will introduce you to the daily maintenance precautions of the vibrating feeder:

　　1. Always check the amplitude and motor current of the feeding trough, and pay attention to whether the sound of the equipment is normal. If the sound suddenly becomes louder or there is a crash, carefully analyze the cause and s* immediately. Overhaul the motor every six months and replace the internal bearings.

　　2. The clearance of the eccentric block of the excitation motor be balanced at times. Always check whether the bolts are loose and whether the clearance is normal. If the eccentric blocks at both ends run out of synchronization or the strength is inconsistent, it is easy to burn out the motor and affect the use of the entire equipment. Therefore, processing be s*ped immediately.

　　3. Always check whether the suspension device is loose. If the suspension device is loose, it will make the four corners of the vibrating feeder unbalanced and affect the feeding quality, so it should be tightened immediately.

　　4. Always check the vibration amplitude during the use time and observe whether the surface temperature of the motor is normal.

　　5. Strengthen the lubrication of the machinery, and regularly add lubricating oil to the bearing during use, once every two months, and once every 30 days in the high temperature season.