What should be paid attention to in the safe operation of the cone crusher?

Time：2019-11-19 15:39:46 Share To

The cone crusher should meet the following safety technical requirements:
1. Check before starting, and start running after confirming normal.

2. When starting the main motor, turn off the circuit breaker and oil switch in turn. When shutting down, the oil switch and disconnector should be closed in sequence. When the main unit is still running, it is forbidden to cut off the working power.
3. The lubrication station should be started before starting the main unit. The lubrication station can only be s*ped after the main unit has s*ped running. The host can only feed after normal startup and operation, and can only be s*ped after the feed is s*ped and drained.
4. When the cone crusher is running, the temperature of the hydraulic oil should meet the requirements specified by the equipment.
5. The particle size of the broken material should meet the requirements of the product specification. The feed should pass through the distribution plate and the feed rate should not be higher than the level of the mortar w .
6. The operating current and power not exceed 85% of the rated current and power.
7. Equipment should be inspected, maintained and repaired regularly.
8. When the crusher is running, check the pressure of the locking system and the working condition of the hydraulic station. If the oil leakage and the blocking force are insufficient, s* the inspection and repair.