Dust Misoperation, How to Protect Hubei Production Line from Damage?

Time：2024-07-09 15:44:36 Share To

　The jaw breaking equipment needs to undergo technical dust cleaning throughout the entire crushing production line, because how can the jaw breaking equipment not perform dust cleaning during the crushing production line of sand and gravel? This can lead to a decrease in the efficiency of the jaw breaking equipment and affect the quality of the stone material in the production line! At the same time, this will also reduce the service life of the jaw breaking equipment. In daily industrial operations and material transportation, jaw breaking equipment will produce a large amount of dust and dust, causing serious pollution to the environment. If not cleaned regularly in a timely manner, it will cause damage to the jaw breaking equipment.

　In the crushing production line of the industry, jaw breaking equipment can take reasonable dust removal measures to reduce the degree of dust pollution. When the jaw breaking equipment is used to crush materials with high humidity, such as wet clumping, large hardness and shape, the dust particles entering the dust collector are coarser than when crushing dry materials. The bag filter is prone to sticking the bag, and the feeder is prone to blockage, resulting in a significant increase in ventilation resistance and a decrease in ventilation capacity of the bag filter, * to severe dust emission.

　The bag filter used in the crushing production line of the general jaw breaking equipment has a sm filtering area, insufficient ventilation, and a relatively large amount of dust in the working environment, which is not conducive to breathing. There are many malfunctions in the sand and gravel crushing production line and supporting components due to jaw breakage, which will affect normal dust removal and increase the maintenance workload of the equipment. Dust enters the dust collector pipeline of the jaw fracture, and the elbow at the inlet pipe of the jaw fracture increases the system resistance, making the elbow area susceptible to dust wear and blockage. The use of screw conveyor and grid wheel conveyor bag dust collector to capture dust in jaw breaking equipment increases power consumption and equipment maintenance workload. It is often necessary to dismantle the grid wheel feeder, which will exacerbate the degree of air leakage in the ash hopper in the long run.

　In the crushing production line of the industry, the material on the belt conveyor of the jaw breaking equipment enters the closed dust removal hood together with the airflow during the f ing process. Dust containing gas diffuses outward through the gaps and holes on the hood w , polluting the environment. In order to reduce dust caused by air leakage from the shell of the jaw breaking equipment, in actual production, water is often sprayed at the inlet of the crusher when the material is dry, which exacerbates the blockage of the filter bag paste bag and the feeder of the bag filter. Due to the intermittent cleaning process of bag filters, the air leakage of the partition wheel is also an issue that cannot be ignored for the dust generated during the production of jaw breaking equipment when the filter is working norm y.