What inspection work needs to be done before the work of jaw crusher

Time：2023-06-09 16:31:46 Share To

　　The jaw crusher crushes various materials and has a large discharge fineness. However, it is also important to note that users should pay attention to the corresponding usage standards before using it. The equipment is used to crush materials.

　　1, check the crushing cavity before production and use, whether there are foreign objects, including the materials left in the cavity during the last processing, various production tools, wire, iron blocks, etc. If there are, please take timely out. If there are these things, there is a risk of burning the motor or wire block, etc. due to excessive load after starting the machine and damage the jaw plate and other parts inside the machine.

　　2, before starting the machine, check whether the measures of the stone crusher has been done, because no matter what, it is the main thing, no accident can be d successfully.

　　3, before starting the jaw crusher, check whether the screws fixing the machine are loose, and whether the foundation of the bearing machine is too soft. If the screws are found to be loose, they should be reinforced in time. If the foundation is found to be bad, measures should be taken to reinforce the foundation.

　　4、 Before using the equipment, check whether the machine bearings and other places need good lubrication and whether the lubricant in the thin oil station is sufficient. This machine has a good lubrication effect, so that the production is better and reduce the friction between parts.