Analysis on the reason of sand making machine stuck material

Time：2023-02-14 16:40:13 Share To

　　Sand making machine is the * important ore crushing equipment in sand and stone factory, and when the equipment is in use, it often encounters the problem of card material. The card material is the material that can not be discharged in the equipment, resulting in blockage. If the equipment has card material, it will not only lead to the equipment can not work, but also affect the progress of subsequent production.

　　1. Problems of the equipment itself

　　The model of the sand machine is also the key to causing the stuck material. We determine the material to be broken after consulting the relevant technical personnel according to our actual situation, and then choose the appropriate model of equipment.

　　2, the material water content is large

　　If the water content of the materials treated by the sand machine is too large, it will adhere to the inner w of the equipment after entering the equipment is crushed, thus causing the card material. Therefore, it is necessary to control the water content of the materials entering the equipment to avoid the phenomenon of the card material.

　　3, the material is strong or the particle size is too large

　　If the hardness of the material exceeds the bearing range of the equipment or the granularity is larger, it will also cause the card phenomenon of the equipment, so the size and hardness of the broken material be controlled within the processing range of the equipment.

　　4, feed speed is too fast

　　When the conveying speed of the material is fast, the sand making machine can not break and discharge the material in time, * to the load of the equipment, which leads to the occurrence of the plugging phenomenon. Therefore, when feeding, it is necessary to control the uniformity and continuity of the material and reduce the probability of the material stuck in the equipment.

　　5, the triangle belt tightness is inappropriate

　　The main function of the triangle belt is to transfer the power generated by the motor to the groove wheel, and then the stone is crushed. If the triangle belt is too loose or slipping, it will lead to the rotation of the groove wheel is abnormal, and the crushing force of the material is weakened, so the card material appears in the equipment.

　　6. Improper discharge port adjustment

　　During the production of the sand making machine, if there is deviation in the adjustment of the discharge port, the discharge speed will be slowed down, the crushed material will be accumulated in the equipment, and the material will be stuck.