How to maintain a running cone crusher

Time：2022-09-01 08:59:01 Share To

Due to its harsh environment, heavy dust, and inadequate maintenance by some users, cone crushers often have various problems during operation. In general, the cone crusher should pay attention to the following issues during operation to ensure the normal operation of the machine. How to maintain the cone crusher during operation?
1. During the operation of the cone crusher, the feeding should be uniform. If the feeding is not uniform, the production capacity will decrease, the product particle size will be too large, the spring will move frequently, the bowl bearing will be under high pressure, and the power consumption will increase.
2. There be an iron removal device to prevent the crushing chamber from passing iron. If the iron is passed frequently, it may cause a broken shaft accident. To produce at full capacity, otherwise the product particle size will be too coarse.
3. The crushing ratio distribution in the sand making production line should be reasonable, so as to maximize the efficiency of the crusher.
4. The spring pressure should not be too tight. If the pressure is too high, a shaft breakage accident will occur. If the pressure is too sm , the spring will jump frequently, which will affect the normal operation of the crusher, and the particle size of the product will become coarser.
5. The lubricating oil temperature should not be too high or too low, otherwise it will affect the operation of the machine. The lubricating oil should be replaced frequently, and it should not be too dirty. If it is too dirty, it will accelerate the wear of gears, bowl-shaped bushes, bushings, etc., and even cause the bushings to grind to death.
6. The inst ation of the drive belt should not be too tight, otherwise it will cause the drive shaft to rotate inflexibly or break; it should not be too loose, otherwise it will cause the crusher to be stuffy.
7. The feeding material should not be too wet or too sticky, and the fine particles should not be too much, nor too large, otherwise it will cause boring cars. Mineral accumulation at the discharge port of the crusher will also cause boring cars.