How to maintain the cone crusher in the sand and gravel production line

Time：2022-08-09 09:08:54 Share To

The stone production line, also known as the sand and gravel production line, is a special production line for the production of sand and stone for construction, highway, railway and other industries. The main equipment of the production line includes: jaw crusher, impact crusher, cone crusher, sand making machine and other series of equipment. The stone production line is gener y suitable for limestone, river pebbles, quartz sand and other materials. Among them, river pebbles are materials with high hardness. When using crushers and sand making machines to crush and make river pebbles, in addition to routine maintenance, special attention should be paid to some other issues. Maintenance of cone crusher in sand and gravel production line:
The maintenance of cone crusher gener y includes two main parts: lubrication and maintenance. Regular attention and timely lubrication of the friction surface can ensure the normal operation of the machine and prolong its service life. In terms of maintenance, the cone crusher should regularly check and replace parts, perform regular maintenance, and keep a log of equipment maintenance. When crushing harder materials, the wear of the equipment is more obvious. Therefore, a detailed service life test should be established for the frequently worn parts of the cone crusher, so as to know the operating limit of the equipment.
    The cone crusher can start the crusher after confirming that there is no material in the crushing chamber. The starting sequence in the entire sand making production line is dust collector (optional), discharge conveyor, cone crusher, feed conveyor, Vibrating feeder, etc. To prevent steel objects or parts from f ing into the crushing cavity, a detection iron removal device can be inst ed behind the vibrating feeder when conditions permit. Adjust the feeding amount of the feeder and gradu y increase it from sm to large. Gener y, the height of the material in the crushing cavity should be controlled to be four-fifths of the height of the crushing cavity. It should also be noted that the feeding particle size does not stain more than five times the width of the feeding port. Four out of four, the feeding particle size is continuous and uniform, and the cone crusher can norm y exert its suitable efficiency.